BEYNON RUNNING TRACK SYSTEMS
The right track.
For every ambition.
Explore surfaces for school athletics, daily training and competition.
Global brand. Local expertise.
Aneka Usaha — Sole distributor in Malaysia
Visit Beynon's official website✓ World Athletics product certificate
BSS 1000 · Full PUR · 12.7 mm
Certificate S-03-0034
Issued 1 July 2023 · Expiry July 2027
✓ Manufacturer authorisation
Aneka Usaha · Malaysia
Sole distributorship / installer letter
Dated 4 November 2019
✓ Warranty documentation
BSS 1000 Encapsulated
10-year manufacturer warranty sample
Subject to the issued project terms
Product certification applies to the configuration stated on the certificate. Certification of a completed facility is separate. The warranty shown is a sample, not an issued warranty for your project.
View certificate and supporting documents
BSS 1000 — World Athletics product certificate
Referenced test report: R23069CAN-A1 · Labosport Canada · 7 June 2023. The certificate is supplied here; the complete laboratory report was not included in the presentation.
Manufacturer authorisation — 4 November 2019
BSS 1000 Encapsulated — sample 10-year warranty
Find your running track system.
See the surface and the layers beneath it. Explore each system for more details.
BSS 100
Everyday value: a porous rubber base with a textured spray finish.
Structural spray
BSS 200
Added moisture protection through a sealed base and spray finish.
Structural spray
BSS 300
Value meets cushioning in a sealed sandwich construction.
Embedded · Encapsulated · Hobart
BSS 1000ML GEL
A cushioning system with a bio-based gel layer.
Embedded · Encapsulated · Hobart
BSS 1000
Poured polyurethane cushioning for training and competition.
Embedded · Encapsulated · Hobart
BSS 2000
Butyl rubber cushioning with full-depth colour polyurethane.
Embedded · Encapsulated · HobartCHOOSE YOUR SURFACE FINISH
Embedded or Encapsulated?
These finishes describe how the rubber granules form the wearing surface. The complete system underneath also determines cushioning and performance.
| Aspect | Embedded Finish | Encapsulated Finish |
|---|---|---|
| Visual Sample |
|
|
| Manufacturing Method | EPDM granules are broadcast into top wet polyurethane binder, leaving granule tops semi-exposed for physical grip. | EPDM granules are fully pre-mixed in polyurethane resin, applied, and sealed with dual aliphatic topcoats. |
| Granule Protection | Exposed granules subject to physical abrasion, weathering, and gradual granule shedding over time. | Granules are fully sealed inside polyurethane binder, completely locking them against shedding. |
| Initial Investment | Lower Upfront Cost — Standard manufacturing process requiring fewer resin coating coats. | Higher Initial Cost — Premium material formulation and dual aliphatic protective sealers. |
| Maintenance & Lifecycle | Higher Long-Term Maintenance — Requires periodic re-topping, structural repairs, and granule recovery over time. | Near-Zero Maintenance Cost — Eliminates granule loss, lowers cleaning needs, and extends resurfacing intervals. |
Finish and coating details depend on the selected specification. System options: BSS 300, BSS 1000ML GEL, BSS 1000 and BSS 2000.
Performance & cost: Embedded has the lower upfront cost, while Encapsulated has the higher initial investment in return for substantially reduced ongoing surface-maintenance requirements over its lifecycle.
PLANNED AS A COMPLETE SYSTEM
From prepared base to finished track.
Aneka Usaha’s running-track work brings together surface installation, line marking and the equipment required by the agreed project scope.
Prepare the base
Check substrate condition, levels, drainage and suitability before surface application.
Install the surface
Apply the specified cushioning and wearing layers using the approved installation method.
Apply the markings
Set out lanes and event markings to the agreed layout and applicable requirements.
Complete the facility
Install specified indicator plates and equipment, then provide the agreed handover documents.
SEE THE SYSTEMS IN USE
Explore completed projects.
Select a product to explore its project gallery.
MAKE IT YOURS
Design your track colours.
Choose three colours. See your combination instantly.
01 Track colour
All running lanes and the sprint straight.
02 D-zone colour
Left and right change together.
03 Exchange-zone colour
All highlighted exchange areas.
Download just your track design in your selected colours as a high-resolution image.
Colour concept only. Confirm available surface colours with our team. Markings and exchange areas are schematic.
A few things to know.
Which system is right for my facility?
Share the intended use, athlete needs, site conditions and budget with our team. We can help you compare the construction, finish and supporting documents.
Does a product certificate certify my completed track?
The product certificate covers the specified surface. Any certification required for the completed facility must be addressed separately in the project scope.
Can I choose different colours for different areas?
Use the designer to explore the running lanes, both D-zones and exchange zones. Confirm available colours and the final specification with our team.
Let’s plan your running track.
Share your site, intended use and project timeline.